Skip to content

Rules

The laws that shape every decision on the field. 1,207 guides, page 1 of 26.

Rules6 min

LBW Rules Explained

LBW — leg before wicket — is cricket's most-disputed dismissal. Learn the three-part umpire's test, how DRS lines work, what 'umpire's call' means, and the common myths every fan gets wrong.

Read explainer
Rules5 min

Super Over Explained

Super Overs decide tied limited-overs matches. Learn the rules, the two-wickets cap, how a Super Over can itself be tied, and the famous endings from World Cup history.

Read explainer
Rules5 min

Powerplay Rules

Powerplays cap how many fielders can defend the boundary in the early overs of limited-overs cricket. Learn the T20 powerplay, the three ODI phases, and how teams attack and defend through each.

Read explainer
Rules4 min

Free Hit Explained

A free hit is the delivery after a no-ball where the batter can only be run out. Learn when it's awarded, why limited-overs cricket added it, and how batters play it.

Read explainer
Rules5 min

Wide Ball vs No Ball in Cricket

A wide and a no-ball both cost the batting team an extra run and a re-bowl, but the rules that define each are different. Learn what separates them and when a free hit follows.

Read explainer
Rules6 min

Cricket Umpire Signals Explained

Every cricket umpire signal from four and six to wide and dead ball — explained with clear descriptions of each arm gesture and when the umpire uses it.

Read explainer
Rules4 min

What Is a Maiden Over in Cricket?

A maiden over is six consecutive legal deliveries in which no runs are scored. Learn what counts as a maiden, why bowlers target them, and who holds the maiden-over records across all formats.

Read explainer
Rules5 min

What Is a Declaration in Cricket?

A declaration is when the batting captain closes their team's innings before all ten wickets fall. Learn when and why captains declare, the tactical calculations involved, and the risks of declaring too early or too late.

Read explainer
Rules5 min

What Is a Follow-On in Cricket?

The follow-on forces a team that trails by a large margin to bat again immediately. Learn the run-deficit thresholds for each format, why captains choose to enforce or waive it, and how the follow-on has shaped famous Test matches.

Read explainer
Rules6 min

DRS Explained

The Decision Review System (DRS) lets players challenge on-field umpire decisions using ball-tracking, audio, and thermal imaging technology. Learn how many reviews each team gets, what 'umpire's call' means, and why DRS changed cricket forever.

Read explainer
Rules5 min

What Is a Hat-Trick in Cricket?

A hat-trick is when a bowler dismisses three batters on three consecutive deliveries. Learn the rules around hat-tricks across formats, which bowlers have taken hat-tricks in World Cups and Tests, and why it's one of cricket's rarest achievements.

Read explainer
Rules5 min

Mankading Explained

Mankading is the dismissal of the non-striker batter by the bowler before releasing the ball if they leave their crease too early. Learn why it's now fully legal under ICC rules, its controversial history, and the famous instances that sparked debate.

Read explainer
Rules5 min

Stumping in Cricket

A stumping dismisses the batter when they step out of their crease to play a delivery and the wicketkeeper breaks the stumps with the ball before they regain ground. Learn exactly when a stumping is valid, how it differs from a run-out, and famous stumping records.

Read explainer
Rules5 min

Run Out in Cricket Explained

A run out happens when a fielder breaks the wicket while the batsman is short of his crease while running between the wickets. Learn the exact rules, the difference between a run out and a stumping, which batsman is out when both have crossed, and the greatest fielding run outs in history.

Read explainer
Rules5 min

Impact Player Rule in IPL

The Impact Player rule lets IPL teams substitute one player per game after the toss, allowing a tactical change not possible in standard T20 cricket. Learn exactly how it works, when teams can make the substitution, how it has changed IPL strategy, and whether other T20 leagues have adopted it.

Read explainer
Rules4 min

Night Watchman in Cricket Explained

A night watchman is a lower-order batsman sent in to bat higher than usual when a wicket falls near the end of the day's play in Test cricket — protecting a specialist batter from having to face a fresh spell in fading light. Learn when captains use the tactic, its pros and cons, and the greatest night watchman innings in history.

Read explainer
Rules4 min

Caught Out in Cricket

Being caught out is the most common dismissal in cricket. Learn the rules: how many fielders can stand where, the boundary catch rules, caught behind vs edge to slip, the role of the third umpire reviewing catches, and the tricky 'not out' scenarios most fans get wrong.

Read explainer
Rules4 min

Cricket Boundaries Explained

A four is scored when the ball reaches the boundary along the ground; a six when it clears the rope in the air. Learn the exact rules for fours and sixes, what happens on overthrows, the 'bump ball' exception, when a boundary cancels a wicket, and how boundaries affect powerplays.

Read explainer
Rules4 min

Five-Wicket Haul (Fifer) in Cricket

A five-wicket haul, or fifer, is when a bowler takes 5 or more wickets in a single innings. Learn why it's treated as a landmark achievement in cricket, who holds the most Test fifers, the records in ODIs and T20s, and how rare it actually is.

Read explainer
Rules5 min

Powerplay in Cricket

Learn what the powerplay is in T20 and ODI cricket, which overs it covers, how many fielders can be outside the circle, and the tactical impact.

Read explainer
Rules4 min

Free Hit in Cricket

A free hit is a delivery on which the batsman cannot be dismissed by most methods. Learn when it's triggered, what dismissals are still allowed, and how it changed white-ball cricket.

Read explainer
Rules5 min

Super Over in Cricket

What is a super over in cricket? Learn the rules, how ties are resolved, what happens if the super over is also tied, and the controversial 2019 World Cup final.

Read explainer
Rules5 min

No-Ball in Cricket

What counts as a no-ball in cricket? Learn the front-foot, high full toss, bouncer, and fielding restriction no-ball types, plus why only front-foot no-balls earn a free hit.

Read explainer
Rules4 min

Wide Ball in Cricket

What is a wide ball in cricket? Learn the umpire signal, how wide criteria differ between Tests, ODIs, and T20s, the penalty, and when a wide can be overturned.

Read explainer
Rules4 min

Extras in Cricket

Extras are runs scored that are not credited to the batter. They include wides, no-balls, byes and leg byes. Learn how each type of extra is scored, how they appear on the scorecard, and which format has the most extras.

Read explainer
Rules5 min read

Crease in Cricket

Cricket has three types of crease painted on the pitch. Learn what the popping crease, bowling crease, and return crease are, why they matter for run-outs, LBW, and no-balls.

Read explainer
Rules4 min read

Beamer in Cricket

A beamer is a full-pitched delivery aimed at the batsman above waist height — one of cricket's most dangerous balls. Learn the Laws, what happens when a bowler bowls a beamer, and why it's treated so seriously.

Read explainer
Rules4 min read

Timed Out in Cricket

A timed out dismissal occurs when a new batsman takes too long to be ready to face the next delivery. Rare but real — learn the Law, the 2023 Angelo Mathews incident, and what captains can do.

Read explainer
Rules5 min read

Cricket Bowling Action

A legal cricket bowling action requires the elbow not to straighten (extend) by more than 15 degrees at the point of delivery. Learn how the ICC tests bowlers, famous throwing controversies, and what makes a bowling action illegal.

Read explainer
Rules4 min read

Dew Effect in Cricket

Dew settling on the outfield in day-night matches makes the ball wet and slippery, neutering swing and spin bowling. Learn how captains adapt, why toss decisions change, and what rules apply.

Read explainer
Rules4 min read

Obstructing the Field in Cricket

Obstructing the field is a dismissal under Law 37 where a batsman wilfully prevents a fielder from fielding the ball. One of cricket's rarest dismissals — learn the rules and most famous cases.

Read explainer
Rules4 min read

Slow Over Rate in Cricket

Teams must bowl a minimum number of overs per hour in international cricket. When they fall short, the ICC issues fines and match bans. Learn the targets, penalties, and why over rates matter.

Read explainer
Rules5 min read

Cricket Weather Rules

Rain and bad light are cricket's most common disruptions. Learn when umpires offer players the light, how covers work, when DLS applies, and what 'no result' means for each format.

Read explainer
Rules4 min read

Concussion Substitute Rule in Cricket

The ICC introduced concussion substitutes in 2019: if a player suffers a concussion during a match, a like-for-like replacement can play. Learn how the rule works, who approves it, and the controversies.

Read explainer
Rules4 min read

Retired Hurt in Cricket

A batsman can retire hurt if injured during their innings and return later. 'Retired out' is a voluntary retirement that counts as a dismissal. Learn the Laws, when it applies, and famous examples.

Read explainer
Rules5 min

Cricket Umpire Signals

Decode every umpire signal in cricket: six, four, out, wide, no-ball, dead ball, and more — with clear explanations of what each gesture means and when it's used.

Read explainer
Rules5 min

Cricket Powerplay Rules

What is a powerplay in cricket? Learn the fielding restrictions in T20 and ODI powerplays, how many overs they last, and why the first 6 overs are so critical to any match.

Read explainer
Rules4 min

Hit Wicket in Cricket

What is hit wicket in cricket? Learn when a batter is dismissed hit wicket, how rare it is, and the exact Laws of Cricket rule that governs this unusual dismissal.

Read explainer
Rules4 min

Golden Duck in Cricket

What is a golden duck in cricket? Learn the difference between a duck, a golden duck, a diamond duck, and a king pair — and why being dismissed for zero runs is so significant.

Read explainer
Rules6 min

DRS Technology Explained

How does DRS technology work in cricket? Learn what Hawk-Eye, UltraEdge (Snickometer), HotSpot, and Ball Tracking do — and how they help umpires make accurate decisions.

Read explainer
Rules4 min

Bowl-Out in Cricket

What is a bowl-out in cricket? Learn how a bowl-out differs from a Super Over, when it has been used in cricket history, and why it was replaced as the primary tie-breaking method.

Read explainer
Rules4 min

Arm Ball in Cricket

What is an arm ball in cricket? Learn how the arm ball works, why it's used by finger-spin bowlers, and why batters find it harder to read than a standard off-spin or left-arm orthodox delivery.

Read explainer
Rules4 min

Substitute Fielder in Cricket

What is a substitute fielder in cricket? Learn when teams can use a substitute, what a sub fielder can and cannot do, and why substitutes have been controversial at the highest level.

Read explainer
Rules4 min

New Ball Rules in Cricket

When can a fielding team take the new ball in cricket? Learn the new ball rules in Test, ODI, and T20 cricket — why it matters, what advantages a new ball brings, and how teams decide when to take it.

Read explainer
Rules4 min read

Super Over in Cricket

A super over is cricket's tie-breaker: one over per side, highest score wins. Learn how it works in T20Is, ODIs, and the famous 2019 World Cup final.

Read explainer
Rules4 min read

Hat-Trick in Cricket

A hat-trick is three wickets in three consecutive deliveries by the same bowler. Learn what counts, the famous hat-tricks in World Cups, and the record holders.

Read explainer
Rules4 min read

Follow On in Cricket

The follow-on forces a trailing team to bat again immediately. Learn the run deficit thresholds, the strategic considerations, and famous follow-on victories and escapes.

Read explainer
Rules4 min read

Declaration in Cricket

A declaration ends a batting team's innings voluntarily. Learn why captains declare, how timing affects the result, and the famous declarations in Test cricket.

Read explainer

Rules — Cricket Guides

The Laws of Cricket are maintained by the Marylebone Cricket Club (MCC) and have governed the game since 1744. Understanding them separates a casual viewer from someone who truly follows what is happening on the field.

The most debated law in cricket is Law 36 — Leg Before Wicket (LBW). A batter is out LBW when the ball hits their body (not the bat) and the umpire judges it would have gone on to hit the stumps, provided the ball pitched in line or outside off stump, and the batter was not playing a shot outside their leg stump. The introduction of the Decision Review System (DRS) has made LBW decisions far more accurate: ball-tracking technology predicts the ball's path with sub-centimetre precision, and 'Umpire's Call' retains the on-field decision when the ball is clipping the stumps rather than hitting them full.

Fielding restrictions shape the scoring patterns of every limited-overs match. In an ODI, Powerplay 1 (overs 1–10) restricts the fielding team to two fielders outside the 30-yard circle, creating an open outfield that rewards early aggression. Batting Powerplay (the optional five overs, typically taken in the middle) can be used strategically to attack a weakened bowling spell. In T20Is the first six overs are mandatory Powerplay with only two fielders outside the circle. These restrictions evolved to encourage higher scoring and make limited-overs cricket more watchable — and the data shows run rates in the first six overs of a T20I now average above 9 per over at the highest level.

The free hit rule, introduced to penalise no-balls, awards the batter a delivery from which they cannot be dismissed by any fielded method — only a run-out or handling the ball applies. In T20Is, a front-foot no-ball typically costs 2–3 additional runs (the extras plus the free-hit delivery) when a batter capitalises. The wide rule differs by format: in Tests, a ball must be genuinely out of reach to be called wide; in T20Is the umpire stands closer to the stumps when calling wides, meaning straighter deliveries are penalised even if the batter could theoretically reach them. These rules, and dozens more, are covered in depth across this collection of 1,200+ guides.

Rare dismissals — handled ball, hit the ball twice, timed out, obstructing the field — appear occasionally at all levels and cause confusion even among experienced fans. The DRS protocol, the no-ball review process (now referred to the third umpire), ball-change procedures, the follow-on threshold (200 runs in Tests, 150 in five-day matches), and the Mankad (non-striker run-out pre-delivery) all feature in detail across the guides in this section. Whether you want to settle a pub argument about whether a batter can be given out obstructing the field for accidentally deflecting a return throw, or understand exactly when a match referee can intervene, you will find the answer here.

← Back to all cricket guides · Cricket Glossary (1,900+ terms) · Test your knowledge →