Rules
The laws that shape every decision on the field. 1,207 guides, page 9 of 26.
No Ball Types in Cricket: Every Reason a Delivery Is Illegal
A no ball in cricket can be called for many reasons beyond just overstepping — from illegal actions to field placements, knowing all types helps understand cricket's rules fully.
Read explainerFront Foot No Ball in Cricket: When the Bowler Oversteps
A front foot no ball is called when the bowler's front foot lands completely beyond the popping crease when delivering, triggering an extra run and a free hit in limited-overs cricket.
Read explainerBack Foot No Ball in Cricket: When the Bowler's Back Foot Crosses the Return Crease
A back foot no ball is called when the bowler's back foot lands outside the return crease during delivery, an infringement less common but equally illegal as the front foot no ball.
Read explainerWaist-Height Full Toss (Beamer): Cricket's Most Dangerous No Ball
A waist-height full toss or beamer is an automatic no ball in cricket — any full-pitched delivery above waist height is illegal, dangerous, and penalised immediately.
Read explainerWide Delivery in Cricket: When the Ball Is Too Far from the Batsman
A wide in cricket is a delivery that passes too far from the batsman for them to reach it with a normal batting stance, penalising the bowling side with an extra run.
Read explainerLegitimate Delivery in Cricket: What Makes a Ball Count in the Over
A legitimate delivery in cricket is a legal ball that counts as one of the six deliveries in an over, as opposed to no balls and wides which must be re-bowled.
Read explainerBouncer Delivery in Cricket
A complete guide to the bouncer — the short-pitched fast delivery that rises sharply toward the batsman's head or body.
Read explainerYorker Delivery in Cricket
Everything you need to know about the yorker — the full-pitched delivery aimed at the batsman's feet to defeat them at the crease.
Read explainerFull Toss Delivery in Cricket
What is a full toss in cricket? Learn how it differs from a yorker, when it becomes a no ball, and how batsmen play it.
Read explainerHalf Volley in Cricket
Understand the half volley — a full-pitched delivery that pitches just in front of the batsman's feet, creating the perfect drive opportunity.
Read explainerGood Length Delivery in Cricket
What makes a good-length delivery the most prized ball in cricket? Learn the zone, why it troubles batsmen, and how bowlers target it.
Read explainerShort-Pitched Delivery in Cricket
Learn what a short-pitched delivery is, how it differs from a bouncer, and why it is a key weapon for fast bowlers on responsive pitches.
Read explainerBacking Up in Cricket Batting
What is backing up in cricket? Why the non-striker backs up at the crease and the rules around run outs at the non-striker's end.
Read explainerStumping in Wicketkeeping
How does a stumping work in cricket? The Laws, the technique, and why the wicketkeeper must be standing up to the stumps to take a stumping.
Read explainerMatch Referee in Cricket
What does a match referee do in cricket? Their authority over player conduct, code of conduct breaches, and their role alongside the umpires.
Read explainerTV Umpire (Third Umpire) in Cricket
What is the third umpire in cricket? How they review decisions, what DRS technology they use, and the limits of their authority.
Read explainerPowerplay in Cricket
What is a powerplay in cricket? How fielding restrictions work in T20 and ODI cricket, the number of fielders allowed outside the ring, and how it changes the game.
Read explainerODI Fielding Restrictions in Cricket
How fielding restrictions work in One Day International cricket — the 30-yard circle, powerplay overs, and the evolution of ODI fielding rules.
Read explainerSuper Over in Cricket
What is a Super Over? How this one-over eliminator works in T20 and ODI cricket when scores are tied, and the rules governing it.
Read explainerDuckworth-Lewis-Stern Method in Cricket
What is the Duckworth-Lewis-Stern (DLS) method? How it calculates revised targets in rain-affected cricket matches and why it replaced simpler systems.
Read explainerConcussion Substitute in Cricket
What is a concussion substitute in cricket? How the ICC rule works, who approves it, and what the replacement player can and cannot do.
Read explainerImpact Player Rule in Cricket (IPL)
What is the Impact Player rule in the IPL? How teams can substitute a player mid-game to change their tactical lineup and what the restrictions are.
Read explainerSubstitute Fielder in Cricket
What is a substitute fielder in cricket? Their limitations (no batting or bowling), when they can be used, and how they differ from concussion substitutes.
Read explainerRunners in Cricket
What is a runner in cricket? How they work, why they are now largely abolished in international cricket, and what the Laws say.
Read explainerRetired Hurt in Cricket
What does 'retired hurt' mean in cricket? The difference between retiring hurt (can return) and retiring out (cannot return), and how it affects the batting order.
Read explainerTimed Out Dismissal in Cricket
What is a timed out dismissal in cricket? The Law, how it can occur, and the famous instance of Angelo Mathews being timed out at the 2023 World Cup.
Read explainerObstructing the Field in Cricket
What is obstructing the field in cricket? When a batsman can be given out for deliberately blocking a fielder, and famous examples.
Read explainerHit the Ball Twice in Cricket
What is 'hit ball twice' in cricket? When a batsman can legally hit the ball again, and when it becomes a mode of dismissal.
Read explainerHandled the Ball in Cricket
What was 'handled the ball' in cricket? How this rare dismissal worked, and why the Law was merged into 'obstructing the field' in 2017.
Read explainerMankad Dismissal in Cricket
What is the Mankad dismissal? How it works, its legality, the 2022 Law change, and the history of the 'Mankading' controversy.
Read explainerBall Condition and Care in Cricket
How fielding teams legally care for the cricket ball — shining, polishing, and maintaining the asymmetry that creates swing and seam movement.
Read explainerNew Ball Rules in Cricket
When can a team take the new ball in cricket? The rules for Tests, ODIs, and T20s, and why the new ball is such a key tactical weapon.
Read explainerBall Tampering in Cricket
What is ball tampering in cricket? Famous incidents, the Laws that prohibit it, and the penalties players and teams face for altering the ball illegally.
Read explainerPink Ball in Day-Night Test Cricket
What is the pink ball? Why it was developed for day-night Tests, how it behaves differently from a red ball, and which matches use it.
Read explainerDead Ball in Cricket
What is a dead ball in cricket? When the ball is dead, what cannot happen when the ball is dead, and why it matters for run outs and penalty runs.
Read explainerLost Ball in Cricket
What happens when the ball is lost in cricket? The Law covering lost ball, how runs are calculated, and how the replacement ball is chosen.
Read explainerTime Wasting in Cricket
What is time wasting in cricket? How the Laws prevent deliberate time-wasting, what penalties apply, and why it matters in Test match cricket.
Read explainerBad Light in Cricket
What is bad light in cricket? When players can go off for bad light, how the light meter works, and what the rules say about resuming play.
Read explainerFollow On in Cricket
What is the follow on in Test cricket? The run lead required, why captains enforce or decline it, and its tactical implications.
Read explainerDeclaration in Test Cricket
What is a declaration in Test cricket? When captains close their innings, the strategy behind it, and some of the most famous declarations in history.
Read explainerPitch Invasion in Cricket
What happens when spectators or players enter the field of play unlawfully — laws, penalties, and famous incidents of pitch invasion in cricket.
Read explainerStumping in Cricket
A complete guide to the stumping dismissal — how it works, the role of the wicketkeeper, and the laws governing this mode of dismissal.
Read explainerHit the Ball Twice in Cricket
An explanation of the rare 'Hit the Ball Twice' dismissal — the laws, purpose, and famous instances where it has been given in international cricket.
Read explainerObstructing the Field in Cricket
Law 37 explained — when a batter is dismissed for obstructing a fielder, intentional vs accidental obstruction, and how DRS applies.
Read explainerHandled the Ball in Cricket
The history of the 'Handled the Ball' dismissal, how the law changed in 2017, and why deliberate handling is now classified under Obstructed the Field.
Read explainerTimed Out in Cricket
Law 40 explained — what it means to be Timed Out, the time limits for incoming batters, and the one famous instance of this dismissal in international cricket.
Read explainerBall Tampering in Cricket
What ball tampering means in cricket, the laws and penalties under Law 41, famous incidents, and how ICC anti-tampering regulations work.
Read explainerDisputing an Umpire's Decision in Cricket
What players can and cannot do when they disagree with an umpire — the laws on dissent, DRS, and the code of conduct implications of challenging an official.
Read explainerRules — Cricket Guides
The Laws of Cricket are maintained by the Marylebone Cricket Club (MCC) and have governed the game since 1744. Understanding them separates a casual viewer from someone who truly follows what is happening on the field.
The most debated law in cricket is Law 36 — Leg Before Wicket (LBW). A batter is out LBW when the ball hits their body (not the bat) and the umpire judges it would have gone on to hit the stumps, provided the ball pitched in line or outside off stump, and the batter was not playing a shot outside their leg stump. The introduction of the Decision Review System (DRS) has made LBW decisions far more accurate: ball-tracking technology predicts the ball's path with sub-centimetre precision, and 'Umpire's Call' retains the on-field decision when the ball is clipping the stumps rather than hitting them full.
Fielding restrictions shape the scoring patterns of every limited-overs match. In an ODI, Powerplay 1 (overs 1–10) restricts the fielding team to two fielders outside the 30-yard circle, creating an open outfield that rewards early aggression. Batting Powerplay (the optional five overs, typically taken in the middle) can be used strategically to attack a weakened bowling spell. In T20Is the first six overs are mandatory Powerplay with only two fielders outside the circle. These restrictions evolved to encourage higher scoring and make limited-overs cricket more watchable — and the data shows run rates in the first six overs of a T20I now average above 9 per over at the highest level.
The free hit rule, introduced to penalise no-balls, awards the batter a delivery from which they cannot be dismissed by any fielded method — only a run-out or handling the ball applies. In T20Is, a front-foot no-ball typically costs 2–3 additional runs (the extras plus the free-hit delivery) when a batter capitalises. The wide rule differs by format: in Tests, a ball must be genuinely out of reach to be called wide; in T20Is the umpire stands closer to the stumps when calling wides, meaning straighter deliveries are penalised even if the batter could theoretically reach them. These rules, and dozens more, are covered in depth across this collection of 1,200+ guides.
Rare dismissals — handled ball, hit the ball twice, timed out, obstructing the field — appear occasionally at all levels and cause confusion even among experienced fans. The DRS protocol, the no-ball review process (now referred to the third umpire), ball-change procedures, the follow-on threshold (200 runs in Tests, 150 in five-day matches), and the Mankad (non-striker run-out pre-delivery) all feature in detail across the guides in this section. Whether you want to settle a pub argument about whether a batter can be given out obstructing the field for accidentally deflecting a return throw, or understand exactly when a match referee can intervene, you will find the answer here.
← Back to all cricket guides · Cricket Glossary (1,900+ terms) · Test your knowledge →
